Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Optimal mining rates revisited: Managing mining equipment and geological risk at a given mine setup

This paper presents a mixed integer programming formulation dealing with the effective minimisation of risk incurred when optimizing mining production rates in such a way that production targets are met in the presence of geological uncertainty. This is developed through the concept of a “stable solution domain” that provides all feasible combinations of ore and waste extraction for the ultimate pit limit of a given deposit, independent of the geological risk. The proposed formulation provides an optimal annual extraction rate, together with the optimal utilization of a mining fleet and an equipment acquisition program. This solution eliminates unnecessary capital expenses and is feasible under all geological scenarios. The mathematical programming model is detailed and tested at a gold deposit. The results are used as input to a production schedule design and are compared to the schedule generated using a constant mining rate; the comparison shows that about 40% of equipment acquisition can be delayed for 7 years and mill demand still be met, thus maximizing profit and minimizing costs.     

Micro molecular tagging velocimetry for analysis of gas flows in mini and micro systems

A new micro molecular tagging velocimetry (μMTV) setup has been developed to analyze velocity fields in confined internal gas flows. MTV is a little-intrusive velocimetry technique. It relies on the properties of molecular tracers which can experience relatively long lifetime luminescence once excited by a laser beam with an appropriate wavelength. The technique has been validated for acetone seeded flows of argon inside a 1 mm depth rectangular minichannel, with a multilayer design offering two optical accesses. Velocity profiles have been obtained using a specific data reduction process, with a resolution in the order of 15 μm. The experimental data are compared to theoretical velocity profiles of compressible pressure-driven flows. A good agreement is observed, except close to the walls, where the accuracy would still need to be improved. Following these first results obtained at atmospheric pressure, the influence of pressure on the luminescence intensity of acetone molecules is analyzed. The obtained data lead to a discussion of MTV applicability to rarefied flows and its possible use for a direct measurement of velocity slip at the channel walls.     

MidDRIFTS-PLSR-based quantification of physico-chemical soil properties across two agroecological zones in Southwest Germany: generic independent validation surpasses region specific cross-validation

Development of spectroscopic prediction models via partial least squares regression (PLSR) suggests that model performance is highly affected by means of calibration and nature of the dataset. This study compares the predictive performance of PLSR models obtained by cross-validation and independent validation to quantify physico-chemical soil properties from their mid-infrared diffuse reflectance Fourier transform spectra (midDRIFTS) across two contrasting regions, Kraichgau (K) and Swabian Alb (SA), in Southwest Germany. We evaluated the capability of midDRIFTS-PLSR models for predicting total carbon (TC), organic carbon (TOC), inorganic carbon (TIC), nitrogen (TN), mineral N (N_min), C:N ratio, hot water extractable C and N (C_HWE, N_HWE), microbial biomass C and N (C_mic, N_mic), pH, bulk density, and clay, silt and sand contents of 126 soil samples. Based on calibrated models, most soil properties were predicted successfully using either calibration approach with residual prediction deviations ≥3 and R² > 0.9, except for N_min, C/N ratio, pH, bulk density and sand. However, predictive performance of generic independent validation derived models (GIC) of test set was considerably higher than generic cross-validation models. Validation using GIC models gave relatively the same predictive performance with those obtained in calibration except for N_min. Validation of region specific cross-validated models, however, resulted in successful predictions only for TC, TIC, TOC and TN in SA and TC and TIC and TOC in K. Our results show the superiority of independent validation over both generic and region specific cross-validation as a robust tool for predicting soil properties without further laboratory measurements.     

Runge–Kutta Residual Distribution Schemes

We are concerned with the solution of time-dependent non-linear hyperbolic partial differential equations. We investigate the combination of residual distribution methods with a consistent mass matrix (discretisation in space) and a Runge–Kutta-type time-stepping (discretisation in time). The introduced non-linear blending procedure allows us to retain the explicit character of the time-stepping procedure. The resulting methods are second order accurate provided that both spatial and temporal approximations are. The proposed approach results in a global linear system that has to be solved at each time-step. An efficient way of solving this system is also proposed. To test and validate this new framework, we perform extensive numerical experiments on a wide variety of classical problems. An extensive numerical comparison of our approach with other multi-stage residual distribution schemes is also given.     

Fabrication of mesoporous calcium silicate/calcium phosphate cement scaffolds with high mechanical strength by freeform fabrication system with micro-droplet jetting

In this study, we explored the feasibility of fabrication bioactive mesoporous calcium silicate/calcium phosphate cements (MCS/CPC) scaffolds with high mechanical strength by Freeform Fabrication System with Micro-Droplet Jetting. After preparation of ordered mesoporous calcium silicate (MCS) powder, ready-to-use MCS/CPC paste was formed by mixing calcium phosphate cement (CPC) powder and MCS powder with the binder polyvinyl alcohol (PVA) aqueous solution at a certain ratio of powder to liquid. MCS/CPC scaffolds with various architectures, pore sizes, and interconnectivity were then directly printed at room temperature using MCS/CPC paste. The mechanical strength, apatite formation, degradation rate, and cytocompatibility of the composite scaffolds were systematically investigated. The results showed that MCS/CPC paste exhibited outstanding printability to form MCS/CPC scaffolds. The hybrid MCS/CPC scaffolds with predefined pore size of 350 μm showed fast degradation rate, high mechanical strength, and good cytocompatibility. It was indicated that the hybrid MCS/CPC scaffolds might be a promising candidate for critical bone defect repair.     

Development of docetaxel nanocapsules for improving in vitro cytotoxicity and cellular uptake in MCF-7 cells

The aim of this study was to fabricate docetaxel loaded nanocapsules (DTX-NCs) with a high payload using Layer-by-Layer (LbL) technique by successive coating with alternate layers of oppositely charged polyelectrolytes. Developed nanocapsules (NCs) were characterized in terms of morphology, particle size distribution, zeta potential (ζ-potential), entrapment efficiency and in vitro release. The morphological characteristics of the NCs were assessed using transmission electron microscopy (TEM) that revealed coating of polyelectrolytes around the surface of particles. The developed NCs successfully attained a submicron particle size while the ζ-potential of optimized NCs alternated between (+) 34.64?±?1.5 mV to (?) 33.25?±?2.1 mV with each coating step. The non-hemolytic potential of the NCs indicated the suitability of the developed formulation for intravenous administration. A comparative study indicated that the cytotoxicity of positively charged NCs (F4) was significant higher (p?in vitro on MCF-7 cells. Furthermore, cell uptake studies evidenced a higher uptake of positive NCs (≥1.2 fold) in comparison to negative NCs. In conclusion, formulated NCs are an ideal vehicle for passive targeting of drugs to tumor cells that may result in improved efficacy and reduced toxicity of encapsulated drug moiety.     

Predicting nitrogen leaching with the modified LEACHM model: validation in soils receiving long-term application of animal manure composts

A variety of process-based models have been developed for predicting nitrogen (N) dynamics in agro-ecosystem; however, no reliable models have been validated for N leaching from soils receiving a long-term application of different types of animal manure composts. The Leaching Estimation and Chemistry Model (LEACHM) was recently modified by incorporating the basic structure of Rothamsted Carbon Model for extending its ability to describe soil organic matter decomposition and subsequent N leaching in soils rich in organic matter. We evaluate the applicability of the modified LEACHM in cropped Yellow soils receiving 10-year application of cattle or swine manure compost in addition to chemical fertilizers, where high-frequency field monitoring data of soil water contents, soil N contents and leachate N concentrations were available for the last 3 years. Particular attention was paid to determine all input parameters from independent measurements, parameterization from known soil properties or databases without optimisation to fit the measured field data. The model reasonably predicted temporal changes in the soil NH₄-N and NO₃-N contents, and inorganic N concentrations in the leachate as well as their differences due to different manure compost/chemical fertilizer applications. The simulations of leached N concentration yielded a Willmott index of agreement (IA) of 0.62–0.68, with those for soil moisture, soil nitrate content and crop N uptake all within an acceptable IA range. In view of the good performance without site-specific calibrations, the modified LEACHM appears to be a valuable tool for predicting N leaching from cropped soils receiving long-term manure compost applications.